• Home
• Get a Quote
• Blog

Finishing procedures have to be planned properly and much ahead of time; call Orinda concrete finishing contractors to obtain the texture and looks you desire. Proper consolidation and leveling is essential, whether it is a simple or decorative surface finish. A successful job depends on the right choice of the concrete mix and hiring the right personnel for the finishing. Make sure the concrete is directly poured out for the finishing; begin with the far end and work towards the middle.

When you pour out the concrete, you will need special tools for finishing it; call Orinda concrete finishing contractors for excellent support to get the desired results. If you have dry hot weather on the day of finishing, the concrete will begin to set more quickly; you may have to do the finishing within a short span of time. Use a good edging tool to level off at the edges, and clean up the joints and rough spots before finishing the slab by dragging a soft brush over it.

If you are working on large slabs for your patios, driveways and pathways, make sure it is wide enough; get Orinda concrete finishing contractors to set the concrete and give the finishing touches. A general rule of the thumb is to allow a slight sloping of the surface towards the edges to let excess water to run off, especially during the rains. Do not forget to slope your slab towards the edges by at least a quarter inch or more.

Using a finishing machine is fast but it may not produce the desired results; approach Orinda concrete finishing contractors for quick finishing using the correct techniques. You can run a machine if it is a large project, but make sure there are no holes or gaps, humps or voids in the finished surface. Imperfections on the concrete will show, and are hard to correct after the material has hardened. Create a slip resistant surface by brushing the finished surface gently.