• Home
• Get a Quote
• Blog

No matter what type of wood you have used for your door, contact Atlanta door staining companies for staining it as per your wishes. Preparation for staining is important and it varies with each material; otherwise you may not get the desired finish. Depending on whether the wood is hard or soft, you will have to use different procedures. If you are unsure of the process, simply hand over the job to these professionals and they will take care of all the minute details.

Staining fiberglass doors involves unique methods and steps; get in touch with professional Atlanta door staining companies to give it a fresh new look. Remove debris from the surface of the door using a good quality cleaner and allow it to dry completely before proceeding towards the next step. You may have to apply at least two coats of stain and you have to allow it to dry between coats for a considerable amount of time; a little sanding of the surface is required before applying the second coat.

When you decide to stain your door, you should first know what type of wood you are dealing with; contact professional Atlanta door staining contractors to determine the exact material. If your door is made of soft wood, you have to even out the surface by sanding prior to staining; otherwise you cannot achieve even application of the stain. Choose a sand paper with fine grain if you want to get the job done quickly, and make sure you even it out to the required finish.

When you are staining a door, work through the panels first and then stain the edges; call Atlanta door staining services for correct procedures and great results. Take care and do not let any excess stain to run across the bottom face of the door. Once you have finished with one side, flip the door carefully after it is completely dry, to stain the other side of the door. Allow the door to dry between coats, and let it rest for at least 24 hours.