• Home
• Get a Quote
• Blog

No matter what type of wood you have used for your door, contact Jacksonville door staining companies for staining it as per your wishes. Preparation for staining is important and it varies with each material; otherwise you may not get the desired finish. Depending on whether the wood is hard or soft, you will have to use different procedures. If you are unsure of the process, simply hand over the job to these professionals and they will take care of all the minute details.

When you begin the staining process, you have to make sure that the surface is free from dust, dirt and debris; simple call Jacksonville door staining contractors for complete cleaning before staining. Apply the first coat of stain by starting with the panel sections and work towards the center; this will prevent pooling of the stain in the corners. Use a proper stain brush to even out the stain and remove excess stain from the surface, if there is any.

When you decide to stain your door, you should first know what type of wood you are dealing with; contact professional Jacksonville door staining contractors to determine the exact material. If your door is made of soft wood, you have to even out the surface by sanding prior to staining; otherwise you cannot achieve even application of the stain. Choose a sand paper with fine grain if you want to get the job done quickly, and make sure you even it out to the required finish.

When you are staining a door, work through the panels first and then stain the edges; call Jacksonville door staining services for correct procedures and great results. Take care and do not let any excess stain to run across the bottom face of the door. Once you have finished with one side, flip the door carefully after it is completely dry, to stain the other side of the door. Allow the door to dry between coats, and let it rest for at least 24 hours.