Hardwood Flooring Refinishing Contractors
After a period of time, the protective finish of a hardwood floor may wear off; get in touch with hardwood floor refinishing companies for applying a new finish at affordable rates. Sanding the floor before a refinishing process can create a lot of dust; these experts are well trained in refinishing these floors using vacuum systems that will hardly cause any dust to be airborne. The floor is ready for use within hours of refinishing.
If you are not sure about the type of finish you require for your hardwood floor, consult hardwood floor refinishing services for ideas and suggestions. It is recommended that a fresh coat of finish is applied every two years or if the surface looks worn out and dull. Though oil-based finishes are cheaper, only water-based ones last longer; these professionals will test new products in a small area first, and then apply it using the right techniques allowing appropriate drying time between coats.
Special machines, tools and techniques are used by hardwood floor refinishing contractors to remove only the top layer of the wood without going through the sanding process, which will reduce the life of the wood. These professionals will work the machine across the room from one end to another and cover all the nooks and corners, followed by thorough vacuuming. Generally three coats of the finish are applied to make the floor look glossy and attractive and as good as new.
The dustless sanding system used by hardwood floor refinishing companies ensures that the dust, dirt and wax are contained at the sanding source before becoming airborne. These professionals will look for cracks, holes and gaps in the floor and use appropriate fillers to even out the surface. Before the wood is refinished, you can stain your hardwood floor if you want to. After this, at least three coats of finish are applied on the floor before applying the final finish.
