• Home
• Get a Quote
• Blog

The process used by Frisco hardwood floor refinishing companies eliminates the need for additional clean-up procedures. After the project is done, you will not find dust in the nooks and corners of your room, and these professionals will do the work so proficiently that there is no room for even the airborne particles. This helps in quick refinishing and, these experts complete the final coat of finish very quickly, enabling you to use your floor as soon as possible.

If you are not sure about the type of finish you require for your hardwood floor, consult Frisco hardwood floor refinishing services for ideas and suggestions. It is recommended that a fresh coat of finish is applied every two years or if the surface looks worn out and dull. Though oil-based finishes are cheaper, only water-based ones last longer; these professionals will test new products in a small area first, and then apply it using the right techniques allowing appropriate drying time between coats.

Special machines, tools and techniques are used by Frisco hardwood floor refinishing contractors to remove only the top layer of the wood without going through the sanding process, which will reduce the life of the wood. These professionals will work the machine across the room from one end to another and cover all the nooks and corners, followed by thorough vacuuming. Generally three coats of the finish are applied to make the floor look glossy and attractive and as good as new.

Using the right type of sanding machines and tools will level an uneven hardwood floor more effectively; only Frisco hardwood floor refinishing companies can choose the correct grit to sand your floor. Following all the procedures in the correct sequence will make sure that effective refinishing is achieved even on uneven, scratched, rough and bare wooden floors. These experts use modern machines that can refinish the floor even without going through the sanding procedures; they will also make sure that the surface is cleaned thoroughly before commencing the process.