• Home
• Get a Quote
• Blog

Before you approach any technician to refinish your hardwood floor, decide whether the wood needs a total refinishing job; contact Raleigh hardwood floor refinishing contractors to inspect your floor and give suggestions. If the floor is warped, deeply stained, and squeaky or damaged, you will need to repair the floor first before refinishing. Very thin floors and new wood cannot be refinished, and if it is underneath another floor covering, the old one will be removed before they refinish the floor.

Refinishing a hardwood floor begins with sanding to remove the top layer; Raleigh hardwood floor refinishing contractors will recommend ways and means to refinish without sanding. These experts will suggest alternative ways of removing only the top glossy layer while keeping the wood and stain in good shape. Too much of sanding will shorten the life of your wooden floor; it is advisable to hand over the project to professionals and do it with great care to keep the wood intact.

If there are too many scratches on your hardwood floor, you need not sand it down to expose the bare wood; get in touch with Raleigh hardwood floor refinishing companies to restore your wooden floor using the correct procedures. First of all the floor is cleaned properly and the floor space along the perimeter is sanded to make sure that there are no uneven spots on the floor. Your floor will look as good as new if a buffer is used; the dust is vacuumed completely before refinishing.

The dustless sanding system used by Raleigh hardwood floor refinishing companies ensures that the dust, dirt and wax are contained at the sanding source before becoming airborne. These professionals will look for cracks, holes and gaps in the floor and use appropriate fillers to even out the surface. Before the wood is refinished, you can stain your hardwood floor if you want to. After this, at least three coats of finish are applied on the floor before applying the final finish.